【英文标准名称】:Polymericthermistors-Directlyheatedpositivestepfunctiontemperaturecoefficient-Part1-1:Blankdetailspecification-Currentlimitingapplication(IEC62319-1-1:2005);GermanversionEN62319-1-1:2005
【原文标准名称】:聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1-1部分:空白详细规范.限流应用
【标准号】:EN62319-1-1-2005
【标准状态】:现行
【国别】:
【发布日期】:2005-11
【实施或试行日期】:2005-11-01
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:尺寸;作标记;温度依赖;额定值;试验要求;连接;限流的;空白格式;温度系数;包装件;检验;电气工程;聚合材料;电阻器;电子设备及元件;试验条件;架设(施工作业);详细规范
【英文主题词】:Blankforms;Connections;Currentlimiting;Detailspecification;Dimensions;Electricalengineering;Electronicequipmentandcomponents;Erecting(constructionoperation);Inspection;Marking;Packages;Polymericmaterials;Ratings;Resistors;Temperaturecoefficients;Temperature-dependent;Testingconditions;Testingrequirements
【摘要】:
【中国标准分类号】:L15
【国际标准分类号】:31_040_30
【页数】:17P.;A4
【正文语种】:英语


Product Code:SAE AIR5320
Title:Summary of Icing Simulation Test Facilities
Issuing Committee:Ac-9c Aircraft Icing Technology Committee
Scope: This SAE Aerospace Information Report (AIR) contains information on most of the major icing simulation ground facilities. An effort was made to obtain data from as many facilities as possible over a two year time period. The data in this document represents the state of the facilities in calendar year 1996. Facilities are constantly changing and upgrading and, therefore, some facility specifications may change during the life of this report.Of the 27 facilities described in this report, the primary use is split with approximately half for engine testing and half for wind tunnel testing. The facilities are limited to ground facilities and, therefore, icing tankers have not been included.The primary purpose of this document is to document the capabilities of the world''s major icing simulation ground facilities. This report should be very useful for an organization interested in selecting a facility for a particular test. The usual information on facility test section size, speed, cloud parameters, etc. are provided for this purpose, along with a contact person at each facility. However, it is the purpose of this report to go beyond the information found in a list of facilities.
Rationale: This SAE Aerospace Information Report (AIR) contains information on most of the major icing simulation ground facilities. An effort was made to obtain data from as many facilities as possible over a two year time period. The data in this document represents the state of the facilities in calendar year 1996. Facilities are constantly changing and upgrading and, therefore, some facility specifications may change during the life of this report.Of the 27 facilities described in this report, the primary use is split with approximately half for engine testing and half for wind tunnel testing. The facilities are limited to ground facilities and, therefore, icing tankers have not been included.The primary purpose of this document is to document the capabilities of the world''s major icing simulation ground facilities. This report should be very useful for an organization interested in selecting a facility for a particular test. The usual information on facility test section size, speed, cloud parameters, etc. are provided for this purpose, along with a contact person at each facility. However, it is the purpose of this report to go beyond the information found in a list of facilities.